Battery, AEP, Li-Pol, 7.4V, 360mAh, 20C, Rhino

AEP Battery Li-Pol 7.4V/360mAh (20C) from Rhino. Quality Li-Pol battery with high-current (up to 30C during load) and the best price/performance ratio. The maximum long-term discharge current 7,2A. Dimensions (mm): 43x21x14

Lithium Polymer (Li-Pol) batteries are the latest energy source. They excel in Lightweight (23g) and excellent discharge characteristics. Due to an entirely different type of electrochemical reactions occurring inside they are made completely different than conventional NiCd or NiMH batteries.

Thanks to its parameters and small dimensions it perfectly replaces the outdated NiCd batteries in electric guns - AEP. With this battery your gun will have a better rate of fire, faster response to the trigger and can withstand a greater amount of rounds. To use it is necessary to adjust the gun and sometimes the battery!

Voltage Li-Pol cell is 3.7V (unlike 1.2V NiCd and NiMH batteries). In operation it should in no case exceed 4.2V for cell voltage during charge and fall below 3V. Exceeding these values ​​indicates a high probability of irreversible damage to the battery. In normal operation, the voltage (before you start charging the battery) should not fall below 3.5V. If you find before charging that voltage is lower, batteries discharge excessively.

For this reason, it is necessary to use a special charger for charging Li-Pol batteries, as well as use special protective circuit (Alarm Li-Pol), which alerts you to critical battery discharge.

Protect cells against damage - trance electrodes, puncturing. If the cells are damaged they can cause an internal short circuit with explosion and fire. Do not puncture "inflated" cells - inflation is a sign of internal damage. During charging place the battery on a fireproof pad, or place to the Li-Pol Safe Bag. The vicinity must be free without fla mmable objects or liquids. The manufacturer recommends storing batteries charged at 70% of capacity.

IllustrativeVideo installation in AEP can see here.