RAVEN barrel, 6.01mm, APS-2 Type 96, AEG, 495mm, PDIPrecision steel 6.01 mm inner barrel PDI series of RAVEN for type of weapons APS-2 Type 96 - 495 mm length. To use this barrel is necessary to install metal hop-up set for APS-2 Type 96 from PDI, which uses standard AEG hop-up buckings. This upgrade is part of the same conditions applicable for cheaper Chinese rifles MB01, MB04, MB05 and MB08 from Well/Warrior. Recess for the hop-up bucking and place of the grooves of barrel lock allows seamless use of conventional weapons AEG.
Very accurate and hard steel barrel STKM13C. Steel barrel has undergone by a specially made process, which also leads to specific dark color. The precision surface coating of material gives to the final product resistance under corrosion as well as very high hardness. Like stainless barrels PDI these are produced by use of the cold forging, which is also used for producing the barrel of guns. This is the precision production of Japanese manufacturing tolerance +/- 0.007 mm.
Internal precision barrel is upgrade part, which together with the appropriate Hop-Up bucking significantly affects the accuracy and partially overall performance/range weapons. The smaller inner diameter, thus inevitably results to better tightening of BBs At the same time, however, higher demands for regular cleaning and using only quality airsoft BBs (we recomend BBs from BLS). Otherwise, it may lead to a reduction of muzzle velocity as well as accidental or "suffocation," of the whole weapon. If you choose a barrel please do not make decision only according to the inner diameterand the lowest price. An important factor is also the procedure and method of production, the type of finishes, materials and the manufacturer and country where it was made.